Tahoe 2WD V8-5.3L (2007)
1. Install a NEW water pump inlet seal to the water pump inlet.
2. Position the water pump inlet to the water pump.
Notice: Refer to Fastener Notice.
3. Install the water pump inlet bolts.
Tighten the bolts to 15 N.m (11 lb ft).
4. Install the radiator outlet hose to the water pump inlet.
5. Position the radiator outlet hose clamp at the water pump inlet.
6. Install the air cleaner outlet duct.
7. Fill the cooling system. Refer to Draining and Filling Cooling System (Vac-N-Fill).