Tahoe 2WD V8-5.3L (2007)
Crankshaft Seal Retainer: Service and Repair
Crankshaft Rear Oil Seal Replacement
Tools Required
J 41479 Crankshaft Rear Oil Seal Installer
Removal Procedure
1. Remove the automatic transmission flexplate, refer to Automatic Transmission Flex Plate Replacement.
2. Remove and discard the crankshaft rear oil seal (141).
Installation Procedure
Important: For proper orientation, note the installation direction of the oil seal. The oil seal is a reverse-lip design. The part number is
