Tahoe 2WD V8-5.3L (2007)
Heat Shield: Service and Repair
Floor Panel Heat Shield Replacement
Floor Panel Heat Shield Replacement
Removal Procedure
1. Remove the catalytic converter, as required. Refer to one of the following:
^
Catalytic Converter Replacement (1500 Series)
^
Catalytic Converter Replacement - Left Side (2500 Series)
^
Catalytic Converter Replacement - Right Side (2500 Series)
2. Remove the muffler assembly, as required.
3. Remove the left front floor panel exhaust heat shield nuts and heat shield, as required.
4. If the vehicle is a Tahoe, Yukon, Yukon Denali, or a Escalade, remove the exhaust heat shield nuts and heat shields, as required.