Tahoe 2WD V8-5.3L (2007)
4. For 2500 series vehicles, loosen the 2 rear oil pan skid plate bolts, remove the 2 front oil pan skid plate bolts and skid plate, if equipped.
5. Remove the catalytic converter, if required. Refer to one of the following:
^
Catalytic Converter Replacement (1500 Series)
^
Catalytic Converter Replacement - Left Side (2500 Series)
^
Catalytic Converter Replacement - Right Side (2500 Series)
6. Remove the dash panel exhaust heat shield nuts (2 or 4).
7. Remove the dash panel exhaust heat shield (1 or 3) from the dash panel studs.
Installation Procedure
