Tahoe 2WD V8-5.3L (2007)
Canister Vent Valve: Service and Repair
Evaporative Emission Canister Vent Solenoid Valve Replacement (1500 Series)
EVAPORATIVE EMISSION CANISTER VENT SOLENOID VALVE REPLACEMENT (1500 SERIES)
REMOVAL PROCEDURE
IMPORTANT: Clean all evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting, in order to avoid possible
EVAP system contamination.
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the chassis wiring harness electrical connector (1) from the EVAP canister vent solenoid.
3. Disconnect the EVAP canister vent solenoid quick connect fitting (1) from the EVAP canister.
4. Disconnect the fuel fill pipe EVAP line quick connect fitting (3) from the vent solenoid.