Tahoe 2WD V8-5.3L (2007)
Power Steering Line/Hose: Service and Repair
Power Steering Cooler Pipe/Hose Replacement (Without Hydroboost)
Power Steering Cooler Pipe/Hose Replacement (Without Hydroboost)
Removal Procedure
1. Remove the front grille.
2. Remove the radiator air baffle and deflector-upper.
3. Remove the radiator grille reinforcement support.
Notice: Refer to Power Steering Hose Disconnected Notice.
4. Remove the power steering gear outlet hose (4) from the cooler.
5. Remove the power steering cooler hose from the power steering pump (1).
6. Remove the bolts (2) retaining the cooler to the radiator support.
7. Remove the power steering cooler from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice.
1. Install the power steering cooler (1) to the vehicle.
Tighten the power steering cooler retaining bolts to 9 N.m (80 lb in).