chevrolet Workshop Repair Guides

Chevrolet Tahoe 2WD V8-53L Workshop Service and Auto Repair Manuals

ABOUT US
4L60-E/4L65-E/4L70-E - Automatic Transmission|Page 13415 > < 4L60-E/4L65-E/4L70-E - Automatic Transmission|Page 13413

4L60-E/4L65-E/4L70-E Transmission Position Switch/Sensor - Service and Repair

Page 2
background image

6. Disconnect the selector cable from the range selector lever ball stud.
7. Remove the control lever to the manual shaft nut (1).
8. Remove the control lever (2) from the manual shaft.

9. Remove the PNP switch bolts.

10. Remove the PNP switch from the manual shaft. If the PNP switch does not slide off the manual shaft, file the outer edge of the manual shaft in

order to remove any burrs.

Installation Procedure

4L60-E/4L65-E/4L70-E - Automatic Transmission|Page 13415 > < 4L60-E/4L65-E/4L70-E - Automatic Transmission|Page 13413