Tahoe 2WD V8-5.3L VIN Z Flex Fuel (2004)
^
Reinstall the fuse and fuse panel cover.
^
Press the "Enter" button to perform the "Refresh" function.
^
"Test in Progress" will be displayed and the right front passenger door lock will cycle once.
^
The screen will display "Procedure Completed".
^
Press the "Exit" button as necessary to return to the main menu screen.
3.
Using the switches in the right front passenger door, verify that the power window and power door lock located in that door function properly.
Important:
The calibrations required for performing SPS reprogram in the next step are based on the type of exterior rearview mirror the vehicle has. To
determine the correct calibration, check the Service Parts Identification Label on the vehicle for the RPO code for exterior mirrors.
4.
Follow normal Service Programming System (SPS) to reprogram the passenger door module with the current calibration available in TIS 2000.
5.
After reprogramming is complete, using the switches in the right front passenger door, verify that the power window and power door lock located
in that door function properly.
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer
