Tahoe 2WD V8-6.0L Hybrid (2008)
7. Install the master cylinder primary piston position sensor, if removed. Refer to Brake Master Cylinder Primary Piston Position Sensor
Replacement (See: Antilock Brakes / Traction Control Systems/Braking Sensor/Switch/Service and Repair) .
8. Connect the master cylinder primary piston position sensor electrical connector.
9. Install the master cylinder seal (1), if removed.
Ensure the brake master cylinder seal is fully seated in the groove on the master cylinder housing.
10. Position the master cylinder (1) to the master cylinder adapter.
