Tahoe 2WD V8-6.0L Hybrid (2008)
3. Install a new 3 phase cable housing seal (2).
4. Install the 3 phase cables and housing (3).
Notice: Refer to Fastener Notice.
5. Install the 3 phase cable retaining bolts (4).
Tighten the bolts to 12 N.m (106 lb in).
6. Install the 3 phase cable bolt protective cover (5).
7. Install a new 3 phase cable cover seal (6).
8. Install the 3 phase cable cover (7).
9. Install the transmission cover terminal housing (8).
10. Install the 3 phase cable cover bolts (9).
Tighten the bolts to 12 N.m (106 lb in).
11. Install the 3 phase cable bracket bolts (1).
Tighten the bolts to 12 N.m (106 lb in).
12. Complete installation of the transmission. Refer to Transmission Replacement.
13. Lower the vehicle.
