Tahoe 2WD V8-6.0L Hybrid (2008)
1. Remove the air cleaner.
2. Disconnect the drive motor generator control module assembly connector (1).
Caution: High Voltage (HV) cables should never be removed from the mounting block. Removal of the individual HV cable from the
mounting block may result in HV cable and/or component damage from improper:
*
Cable sealing
*
Electrical shielding
*
Terminal position assurance
Drain the power electronics cooling system. Refer to Generator Control Module Cooling System Draining and Filling.
Caution: Always remove and install the High Voltage terminal fasteners with a magnet tipped socket. Never touch the exposed electronic
circuit board surface or components. Dropped fasteners or physical contact may result in electronic circuit board damage.
