Tahoe 2WD V8-6.0L Hybrid (2008)
Oxygen Sensor: Service and Repair
Heated Oxygen Sensor Replacement - Bank 2 Sensor 1
Heated Oxygen Sensor Replacement - Bank 2 Sensor 1
Removal Procedure
Notice: Refer to Heated Oxygen and Oxygen Sensor Notice.
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the connector position assurance (CPA) retainer (3).
3. Disconnect the engine wiring harness electrical connector (2) from the HO2S electrical connector (1).
4. Remove the HO2S clip from the engine wiring harness clip (4).
Notice: Refer to Excessive Force and Oxygen Sensor Notice.
