Tahoe 2WD V8-6.0L Hybrid (2008)
8. Install the fuel rail bolts.
Tighten the bolts to 10 N.m (89 lb in).
9. Install the EVAP tube and purge solenoid.
10. Install the EVAP canister purge solenoid to the fuel rail bracket and engage the retainer.
11. Connect the chassis EVAP tube quick connect fitting at the EVAP canister purge solenoid.
12. Connect the EVAP tube quick connect fitting at the intake manifold.
13. Connect the chassis fuel feed pipe (2) quick connect fitting to the fuel rail.
