chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Drive Pinion Flange/Yoke and/or Oil Seal Replacement (8.6/9.5 Inch Axle)|Page 16826 > < Drive Pinion Flange/Yoke and/or Oil Seal Replacement (8.6/9.5 Inch Axle)|Page 16824

Tahoe 2WD V8-6.0L Hybrid (2008)

Page 3
background image

11. Remove the pinion oil seal. Use a suitable seal removal tool. Do not damage the housing.

Installation Procedure

1. Install a new pinion oil seal using the J 22388  .

2. Apply sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent to the splines of the pinion yoke.
3. Install the pinion yoke. Align the marks made during removal.

Notice:  Refer to Pinion Flange/Yoke Installation Notice   .

Drive Pinion Flange/Yoke and/or Oil Seal Replacement (8.6/9.5 Inch Axle)|Page 16826 > < Drive Pinion Flange/Yoke and/or Oil Seal Replacement (8.6/9.5 Inch Axle)|Page 16824