Tahoe 4WD V8-6.0L Hybrid (2008)
1. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
2. If the vehicle is equipped with four wheel drive (4WD), remove the front drive axle. Refer to Differential Carrier Assembly Replacement (8.25
inch) Differential Carrier Assembly Replacement (9.25 inch) .
3. Lower the vehicle.
4. Remove the generator bracket. Refer to Generator Bracket Replacement .
5. Remove the engine mount to frame bolts (1).
6. Raise and support the vehicle halfway. Refer to Lifting and Jacking the Vehicle .
7. Remove the left wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Left Side .
Important: DO NOT raise and/or support the engine by the crankshaft balancer, or oil pan.
8. Place an adjustable (screw type) jack to the tab (1) located on the engine block.
