Tahoe 4WD V8-6.0L Hybrid (2008)
15. Tighten the CMP actuator solenoid valve.
1. Tighten the bolt a first pass to 65 N.m (48 lb ft).
2. Tighten the bolt a final pass an additional 90 degrees using J 45059 .
16. Remove the J 42386-A (1) and bolts.
17. Install the starter motor. Refer to Starter Motor Replacement .
18. Install the oil pump. Refer to Oil Pump, Screen, and Crankshaft Oil Deflector Replacement (RPOs LC9/LMG/LY2/LY5) (See: Engine
Lubrication/Oil Pump/Service and Repair/Oil Pump, Screen, and Crankshaft Oil Deflector Replacement (RPOs LY6/L76/L92))Oil Pump, Screen,
and Crankshaft Oil Deflector Replacement (RPOs LY6/L76/L92) (See: Engine Lubrication/Oil Pump/Service and Repair/Oil Pump, Screen, and
Crankshaft Oil Deflector Replacement (RPOs LY6/L76/L92)) .