Tahoe 4WD V8-6.0L Hybrid (2008)
7. Install the muffler to catalytic converter bolt.
Tighten the nuts to 45 N.m (33 lb ft).
8. Install the transmission crossmember. Refer to Transmission Support Crossmember Replacement (4WD 2500 series) Transmission Support
Crossmember Replacement (2WD 1500 series) Transmission Support Crossmember Replacement (2WD 2500 series) Transmission Support
Crossmember Replacement (4WD 1500 series) .
9. Install the heated oxygen (HO2S) sensors. Refer to Heated Oxygen Sensor Replacement - Bank 1 Sensor 1 , Heated Oxygen Sensor Replacement
- Bank 1 Sensor 2 , Heated Oxygen Sensor Replacement - Bank 2 Sensor 1 and Heated Oxygen Sensor Replacement - Bank 2 Sensor 2 .
10. Position the oil pan skid plate and install the oil pan skid plate bolts, if equipped.
Tighten the bolts to 28 N.m (21 lb ft).
11. Lower the vehicle.
