Tahoe 4WD V8-6.0L Hybrid (2008)
Adhesives, and Lubricants (See: Transmission and Drivetrain/Differential Assembly/Specifications/Fluid Type Specifications/Front Drive Axle) .
Notice: Refer to Fastener Notice .
2. Install the actuator (1 or 3).
Tighten the actuator to 20 N.m (15 lb ft).
3. Connect the electrical connector to the actuator.
4. Install the front differential carrier shield, if equipped. Refer to Shield Replacement (See: Transmission and Drivetrain/Differential
Assembly/Service and Repair/Removal and Replacement/Front Drive Axle/Shield Replacement) .
5. Lower the vehicle.
