Tahoe 4WD V8-6.0L Hybrid (2008)
1. Install the lower control arm.
2. Install the lower control arm retaining bolts.
Notice: Refer to Fastener Notice .
Important: Do not tighten the bolts unless the suspension is at the ride height.
3. Install the lower control arm retaining nut.
*
Tighten the lower control arm to frame bolts to 140 N.m (103 lb ft).
*
Tighten the lower control arm to axle bolts to 160 N.m (118 lb ft).
4. Remove the rear axle support.
5. Lower the vehicle.
