Tahoe 4WD V8-6.0L Hybrid (2008)
5. Install the J 8614-01 as shown.
6. While holding the J 8614-01 , loosen the pinion nut.
7. Remove the washer.
8. Remove the pinion nut and washer.
9. Install the J 8614-2 (2) and the J 8614-3 (3) into the J 8614-01 (1) as shown.
10. Remove the pinion yoke by turning the J 8614-3 (3) clockwise while holding the J 8614-01 (1).
Use a container in order to retrieve the lubricant.