Tahoe 4WD V8-6.0L Hybrid (2008)
Drive/Propeller Shaft: Service and Repair
Front Propeller Shaft Replacement
Front Propeller Shaft Replacement
Tools Required
J 43218 Clamp Pliers - Narrow Jaw
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the transfer case shield, if equipped.
*
For vehicles equipped with the BW 4485-NR3 transfer case, refer to Transfer Case Shield Replacement (See: Transfer Case/Service and
Repair/Removal and Replacement/BW 4485-NR3 - Transfer Case/Transfer Case Shield Replacement) .
*
For vehicles equipped with the for theMP 3023/3024-NQH transfer case, refer to Transfer Case Shield Replacement (See: Transfer
Case/Service and Repair/Removal and Replacement/MP 3023/3024-NQH - Transfer Case/Transfer Case Shield Replacement) .
3. Remove the clamp (4) at the transfer case by prying up the exposed end of the clamp with a flat-bladed tool.
