Tracker 2WD L4-1.6L VIN 6 (2000)
6. Install the rear license plate housing to the rear door. Ensure that the plastic retainers are fully engaged.
Notice: Refer to Fastener Notice in Cautions and Notices.
7. Install the 2 bolts (1) which secure the rear license plate housing .
Tighten the rear license plate housing mounting bolts to 10 N.m (89 lb in).
8. Install the rear license plate to the housing. Secure the license plate with the 2 screws.
9. Install the rear door outside handle. Refer to Rear Door Outside Handle Replacement (See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door
Handle/Rear Door Exterior Handle/Service and Repair/Rear Door Outside Handle Replacement) in Body Rear End.