Tracker 2WD L4-1.6L VIN 6 (2000)
Tighten the front floor foot rest mounting bolts to 10 N.m (7.5 lb ft).
2. Install the left front foot rest cover (2) to the front floor foot rest (1).
Front Side Door Opening Frame Garnish Molding Replacement
Front Side Door Opening Frame Garnish Molding Replacement
Removal Procedure
1. Remove the windshield side garnish molding from the vehicle by gently prying loose the plastic retainers which secure the molding.
2. Remove the body hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement (Left ) (See: Body Hinge Pillar Trim Panel
Replacement (Left ))Body Hinge Pillar Trim Panel Replacement (Right) (See: Body Hinge Pillar Trim Panel Replacement (Right)) in Interior
Trim.
3. Pull the front side door opening frame garnish molding (2) from the pinch weld flange and remove from the vehicle.
Installation Procedure
1. Install the front side door opening frame garnish molding (2) to the pinch weld flange by pressing into place.
2. Install the body hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement (Left ) (See: Body Hinge Pillar Trim Panel
Replacement (Left ))Body Hinge Pillar Trim Panel Replacement (Right) (See: Body Hinge Pillar Trim Panel Replacement (Right)) in Interior
Trim.
3. Install the windshield side garnish molding to the vehicle. Ensure that the plastic retainers are fully engaged.
Rear Compartment Trim Panel Replacement
Rear Compartment Trim Panel Replacement
Removal Procedure