Tracker 2WD L4-1.6L VIN 6 (2000)
2. Secure the seat back cushion cover to the seat back cushion frame with the J-retainer (1) at each side.
3. Install the rear seat recliner inside lower finish cover (2) to the seat back cushion (1). Secure the cover with the 2 screws (3).
4. Install the following components to the seat back cushion (2):
1. The screw and rear seat back cushion bumper (1)
2. The plastic retainer (3)
5. Secure the seat back cushion (1) along the bottom with the J-retainer (2).