Tracker 2WD L4-1.6L VIN 6 (2000)
Seat Cushion: Service and Repair
Rear Seat Cushion Support Replacement
Rear Seat Cushion Support Replacement
Removal Procedure
1. Gently pry and remove the rear seat hinge support cover (2) from the rear seat hinge support (1).
2. Remove the rear seat stopper rod nut (1) from the rear seat hinge support pin (4).
3. Remove the support pin (4) from the rear seat support (2).
4. Remove the 2 bolts (3) which secure the rear seat support (2).
5. Remove the support (2) from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice in Cautions and Notices.
1. Install the rear seat support (2) to the vehicle. Secure the support with 2 bolts (3).
Tighten the rear seat support bolts to 25 N.m (19 lb ft).
2. Secure the rear seat cushion (5) to the support (2) with the rear seat hinge support pin (4).
3. Install the rear seat stopper rod nut (1) to the support pin (4).
