Tracker 2WD L4-1.6L VIN 6 (2000)
Installation Procedure
1. Install the seat cushion cover (1) to the seat cushion pad and frame (3). Secure the cover with the J-retainers.
2. Install the front seat cushion. Refer to Front Seat Cushion Replacement (See: Front Seat Cushion Replacement) .
Rear Seat Cushion Support Replacement
Rear Seat Cushion Support Replacement
Removal Procedure
1. Gently pry and remove the rear seat hinge support cover (2) from the rear seat hinge support (1).
2. Remove the rear seat stopper rod nut (1) from the rear seat hinge support pin (4).
3. Remove the support pin (4) from the rear seat support (2).
4. Remove the 2 bolts (3) which secure the rear seat support (2).
5. Remove the support (2) from the vehicle.
Installation Procedure