Tracker 2WD L4-1.6L VIN 6 (2000)
1. Apply Lubriplate Lubricant, GM P/N 1052196, or the equivalent, to the return spring (8).
Important: Do not hook the return spring on the brake pedal lever before installing the pedal to the bracket.
2. Install the brake pedal return spring (8) to the clutch pedal shaft.
3. Install the brake pedal (9) to the clutch pedal shaft.
4. Install the clutch pedal (13). Refer to Clutch Pedal Replacement in Clutch.
5. Hook the return spring on the brake pedal lever.
6. Measure the brake pedal travel. Refer to Brake Pedal Travel.
7. Measure the distance from the stoplamp switch to the brake pedal stopper. Adjust if necessary. Refer to Stoplamp Switch Adjustment.