Tracker 2WD L4-1.6L VIN 6 (2000)
13. Connect the park brake switch connector (10).
14. Adjust the park brake lever. Refer to Park Brake Lever Adjustment.
15. Position the console over the shift knob.
16. If the vehicle is equipped with an auxiliary power outlet, connect the auxiliary power outlet connector.
17. If the vehicle is equipped with an automatic transmission, connect the power neutral switch connector.
18. Install the console. Secure with 4 screws (1,3,4,6) and 2 clips (2,5).
Removal Procedure
1. Ensure the park brake lever is in the released position.
2. Remove the 4 screws (1,3,4,6), the 2 clips (2,5), and lift up the console.
3. If the vehicle is equipped with an automatic transmission, disconnect the power neutral switch connector.
4. If the vehicle is equipped with an auxiliary power outlet, disconnect the auxiliary power outlet connector.