Tracker 2WD L4-1.6L VIN 6 (2000)
5. Install the push rod clevis (3).
^
The distance between the clevis pin hole and the brake booster assembly should be 109.5 - 110.5 mm (4.31 - 4.35 inch).
Notice: Refer to Fastener Notice in Service Precautions.
6. Tighten the clevis nut (2)
^
Tighten the clevis nut to 19 Nm (14.0 ft. lbs.).
7. Tighten the booster nuts (2).
^
Tighten the nuts to 13 Nm (115.0 inch lbs.).
8. Connect the brake vacuum hose to the brake booster. Secure the hose with the hose clamp.
9. Install the master cylinder. Refer to Master Cylinder Replacement (Non-ABS) or Master Cylinder Replacement (ABS).
