Tracker 2WD L4-1.6L VIN 6 (2000)
^
Tighten the clevis nut to 25 Nm (18 ft. lbs.).
7. Tighten the booster nuts (2).
^
Tighten the nuts to 13 Nm (115 inch lbs.).
8. Connect the brake vacuum hose to the brake booster. Secure the hose with the hose clamp.
9. Install the master cylinder. Refer to Master Cylinder Replacement (Non-ABS) or Master Cylinder Replacement (ABS).
10. Install the Brake Pressure Modulator Valve. Refer to Brake Pressure Modulator Valve (BPMV) Replacement in Antilock Brake Systems.