Tracker 2WD L4-1.6L VIN 6 (2000)
20. Install the accelerator cable (2) to the accelerator cable bracket (1).
21. Install the accelerator cable to the throttle body bellcrank (3). Adjust the accelerator cable as necessary. Refer to Accelerator Controls Cable
Replacement.
22. Connect the Intake Air Temperature (IAT) Sensor.
23. Connect the Mass Air Flow (MAF) Sensor.
24. Install the electrical harness clamps to the air cleaner assembly.
25. Install the air intake pipe (7) to the throttle body.
26. Refill the cooling system as necessary. Refer to Draining and Filling Cooling System.
27. Connect the negative battery cable.
^
Tighten the negative battery cable bolt to 15 Nm (11 ft. lbs.).