Tracker 2WD L4-1.6L VIN 6 (2000)
1. Install the new gasket (2) to the engine block (3).
2. Install the water pump (1).
Notice: Refer to Fastener Notice in Service Precautions.
3. Secure the water pump with mounting nuts and bolts.
^
Tighten the water pump mounting nuts and bolts to 13 Nm (115 inch lbs.).
4. Install new rubber seals (1) to the water pump (2).
5. Install the oil level indicator guide tube.
6. Install the timing belt tensioner (2). Refer to Timing Belt Tensioner Installation.
