Tracker 2WD L4-1.6L VIN 6 (2000)
Muffler: Service and Repair
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the two nuts from the catalytic converter assembly (1) and separate from the resonator/muffler/tail pipe assembly (2).
3. Remove the hangers supporting the resonator/muffler/tail pipe assembly (7).
4. Remove the resonator/muffler/tail pipe assembly from the vehicle.
5. Clean the gasket and the seal mating surfaces.
Installation Procedure
Important: When installing a new exhaust system component, always use new gaskets and seals.
1. Install the resonator/muffler/tail pipe assembly to the vehicle.
2. Support the resonator/muffler/tail pipe assembly with hangers.