Tracker 2WD L4-1.6L VIN 6 (2000)
Fuel Tank Pressure Release Valve: Service and Repair
REMOVAL PROCEDURE
1. Remove the 2 clamps from the pressure control valve.
2. Disconnect the 3 fuel vapor hoses (1) from the pressure control valve.
3. Remove the pressure control valve (2) from the engine compartment.
INSTALLATION PROCEDURE
1. Install the pressure control valve (2) to the engine compartment.
2. Connect the 3 fuel vapor hoses (1) to the pressure control valve.
3. Secure the 2 clamps to the pressure control valve.
