Tracker 2WD L4-1.6L VIN 6 (2000)
Fuel Tank Unit: Testing and Inspection
CAUTION: Place a dry chemical (Class B) tire extinguisher near the area before performing a Fuel Tank Leak Check. Before removing the
fuel tank for a suspected leak, make sure that the fuel pipes or the tubes are not leaking onto the tank. Once removed, make sure that the fuel is
not leaking around the fuel sender O-ring. Failure to follow these precautions may result in personal injury.
1. Drain the fuel tank. Refer to Case Side Cover and Gaskets Assemble.
2. Remove the fuel tank.
3. Plug the fuel feed hose, the fuel return pipe and the fuel vapor pipe on the fuel tank.
4. Plug the fuel filler neck opening.
5. Connect a piece of the hose to the breather hose nipple on the fuel tank and secure with one clamp.
6. Submerge the fuel tank in water or apply a soapy solution to the outside of the tank.
7. Apply 7 to 15 kPa (1-2 psi) air pressure to the breather hose.
8. Air bubbles appearing from the fuel tank indicate a leak.
9. Replace the fuel tank if the tank is leaking.
