Tracker 2WD L4-1.6L VIN 6 (2000)
Tighten the front seat belt mounting bolt to 35 N.m (25 lb ft).
6. Install the shoulder guide anchor bolt (2) which secures the front seat belt (5) to the center pillar.
Tighten
Tighten the front seat belt shoulder guide anchor bolt to 35 N.m (25 lb ft).
7. Close the shoulder guide trim cover (1).
8. Install the rear quarter lower trim panel.
4 Door
REMOVAL PROCEDURE
1. Remove the center pillar lower trim.
2. Open the shoulder guide trim cover (1).
3. Remove the shoulder guide anchor bolt (2) which secures the front seat belt (4) to the center pillar.
