Tracker 2WD L4-1.6L VIN 6 (2000)
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Cautions and Notices.
1. Install the rear seat belt buckle to the floor pan. Secure the buckle with the anchor bolt.
Tighten
Tighten the rear seat belt buckle anchor bolt to 35 N.m (25 lb ft).
2. Install the rear seat belt (5) to the vehicle. Secure the seat belt with the mounting bolt (4).
Tighten
Tighten the rear seat belt mounting bolt to 35 N.m (25 lb ft).
3. Install the rear seat belt lower anchor bolt (3).
Tighten
Tighten the rear seat belt lower anchor bolt to 35 N.m (25 lb ft).
4. Lower the rear seat cushion (3 or 4).