Tracker 2WD L4-1.6L VIN 6 (2000)
4. Measure the resistance between all stator leads (1) using J 39200. If the resistance is greater than 5 ohms for any measurement, replace the stator
(2).
5. Measure the resistance between all stator leads (1) and the stator core using J 39200. If the resistance is less than 5 ohms, replace the stator (2).
6. Measure the length of each brush (3) using J 26900-5. If the brush length is less than the minimum, replace the brush.
Standard Brush Length
16 mm (0.63 in)
Minimum Brush Length
2 mm (0.08 in)