Tracker 2WD L4-1.6L VIN 6 (2000)
7. Install the pinion drive lever seal (3) and the plate (4) to the drive housing (1).
8. Lightly grease the idle gears with Lubriplate lubricant GM P/N 1050109, or the equivalent.
IMPORTANT: Align the notches in the idle gear retainer with the bolt holes in the drive housing.
9. Install the 3 idle gears (3) to the drive housing (1). Secure with the idle gear retainer (2).
10. Lightly grease the armature bearing with Lubriplate lubricant GM P/N 1050109, or the equivalent.
11. Install the armature bearing (2) to the gear shaft.