Tracker 2WD L4-1.6L VIN 6 (2000)
Starter Motor: Mechanical Specifications
Commutator End Cover Bolts
8 Nm
Starter Motor Mounting Bolts
30 Nm
Brush Length-Standard 1.2kW
12.3 mm
Brush Length-Minimum 1.2kW
7 mm
Brush Length-Standard 1.4kW
16.5 mm
Brush Length-Minimum 1.4kW
12.0 mm
Commutator Run-Out-Standard
0.05 mm
Commutator Run-Out-Maximum
0.40 mm
Commutator Outside Diameter-Standard
29.4 mm
Commutator Outside Diameter-Minimum
28.8 mm
Commutator Insulation Depth-Standard
0.4-0.6 mm
Commutator Insulation Depth-Minimum
0.2 mm
Direction of Rotation
Clockwise (as viewed from pinion)
Number of Pinion Teeth
8
Output
1.2 and 1.4 kW
Rating
30 Seconds
Solenoid Operating Voltage
8 V
Starter Motor Current Draw-No-Load-1.2 kW
90 A at 11 V
2500 RPM
Starter Motor Current Draw-No-Load-1.4 kW
90 A at 11 V
3000 RPM
Starter Motor Current Draw-Load -1.2 kW (11 N.m / 97 lb in of torque 880 RPM)
300 A at 7.5 V
Starter Motor Current Draw-Load -1.4 kW (10 N.m / 89 lb in of torque 1000 RPM)
300 A at 7.7 V
Starter Motor Current Draw-Locked Rotor -1.2 kW (20 N.m /14 lb ft of torque)
760 A at 4 V
Starter Motor Current Draw-Locked Rotor -1.4 kW (23 N.m /17 lb ft of torque)
980 A at 4 V
Voltage
12 V