Tracker 2WD L4-1.6L VIN 6 (2000)
1. Install the transmission cooler hoses to the inlet and the outlet cooler pipes at the transmission.
2. Secure the transmission cooler hoses with the 2 inlet and outlet hose clamps (2).
3. Install the transmission cooler hoses to the transmission cooler (1).
4. Secure the transmission cooler hoses with the 2 inlet and outlet hose clamps (2).
5. Install the transmission cooler hoses to the cooler hose retainer clamps.
6. Secure the transmission cooler hoses with the 2 screws.
7. Install the front skid plate to the vehicle.
8. Secure the front skid plate with the 4 bolts.
^
Tighten the front skid plate bolts to 54 Nm (40 ft. lbs.).
9. Lower the vehicle.