Tracker 2WD L4-1.6L VIN 6 (2000)
25. Use a cartridge-type caulking gun to apply a smooth, continuous bead of urethane adhesive.
26. When using the short method, apply the urethane adhesive to the existing bead of urethane adhesive on the body.
27. When using the extended method, use the edge of the quarter window or the inside edge of the reveal molding as a guide for the nozzle in order to
apply the urethane adhesive to the inner surface of the quarter window.
28. With the aid of suction cups, install the quarter window (2) into the opening.
29. Align the tape on the quarter window and on the body.
30. Press the quarter window (2) firmly into place.
31. Tape the quarter window to the body in order to minimize movement until the urethane adhesive cures.
32. Clean any excess urethane adhesive from the body.
Important: Do not direct a hard stream of high pressure water to the freshly applied urethane adhesive.
