Tracker 2WD L4-2.0L VIN C (1999)
Antenna, Radio: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the radio antenna lead from the antenna extension cable, near the junction block beneath the left side of the instrument panel.
2. Attach a piece of mechanics wire to the antenna lead in order to aid in the removal and installation of the antenna cable through the windshield
side pillar.
3. Remove the 2 screws which secure the radio antenna to the windshield side pillar.
4. Remove the antenna (1) from the vehicle by gently pulling the antenna cable up through the windshield side pillar with the mechanics wire
attached.
5. Remove the mechanics wire from the antenna lead (2).
6. Leave the mechanics wire in the windshield side pillar in order to aid in the antenna installation procedure.
INSTALLATION PROCEDURE
