Tracker 2WD L4-2.0L VIN C (1999)
Rear Door Exterior Handle: Service and Repair
REMOVAL PROCEDURE
1. Remove the rear side door water deflector.
2. Open the rear side door outside handle rod retainer (2) and remove the rear side door outside handle rod (1) from the rear side door outside handle
(3).
3. Remove the following components from the door:
3.1.
The 2 bolts
3.2.
The outside handle (3)
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the rear side door outside handle (3) to the door. Secure the handle with the 2 bolts.
Tighten
Tighten the rear side door outside handle bolts to 10 N.m (89 lb in).
2. Install the rear side door outside handle rod (1) to the outside handle (3). Secure the rod by closing the rear side door outside handle rod retainer
(2).
3. Install the rear side door water deflector.
