Tracker 2WD L4-2.0L VIN C (1999)
1. Install the accelerometer (1) to the vehicle.
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the two bolts (2) that retain the accelerometer.
^
Tighten the two accelerometer bolts to 16 Nm (12 ft. lbs.).
3. Connect the accelerometer electrical connector (2).
4. Install the parking brake lever bezel (1).
5. Install the parking brake lever bezel attaching screws (2).
6. Perform A Diagnostic System Check - ABS.
