Tracker 2WD L4-2.0L VIN C (1999)
Cruise Control Switch: Service and Repair
Cruise Release Switch Replacement
REMOVAL PROCEDURE
1. Remove the IP steering column opening trim plate.
2. Disconnect the cruise control release switch electrical connector (3).
3. Loosen the cruise control release switch locknut.
4. Remove the cruise control release switch (1) with the locknut from the clutch pedal bracket by unscrewing it in the counterclockwise direction.
INSTALLATION PROCEDURE
1. Install the cruise control release switch (1) to the clutch pedal bracket by screwing it in a clockwise direction. Secure the release switch with the
locknut.
2. Connect the cruise control release switch electrical connector (3).
3. Install the IP steering column opening trim plate.
