Tracker 2WD L4-2.0L VIN C (1999)
7. Remove the crankshaft pulley.
Installation Procedure
1. Lubricate the front seal and the sealing surface of the crankshaft pulley with Chassis Grease GM P/N 1051344 or equivalent.
2. Install the crankshaft pulley onto the crankshaft indexing the keyway.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the crankshaft pulley retaining bolt using the J 8614-01 to prevent crankshaft rotation when tightening the bolt.
Tighten the bolt to 150 Nm (109 ft. lbs.).
4. Install the radiator.
5. Install the accessory drive belt.
6. Install the cooling fan drive belt.
7. Install the cooling fan.
