Tracker 2WD L4-2.0L VIN C (1999)
1. Install the following components to the intake manifold as necessary:
^
The Throttle Body (7)
^
The Exhaust Gas Recirculation (EGR) valve (2)
^
The EGR pipe
^
The Manifold Absolute Pressure (MAP) sensor (3)
2. Install the new intake manifold gasket to the cylinder head.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the intake manifold to the cylinder head. Secure the intake manifold with the 9 nuts and the 4 bolts.
Tighten the nuts and bolts to 25 Nm (19 ft. lbs.).
4. Install the intake manifold front support bracket. Secure with the 2 bolts.
5. Install the intake manifold top support bracket. Secure with the 2 bolts.