Tracker 2WD L4-2.0L VIN C (1999)
1. Inspect that the timing mark on the engine block (1) is aligned with the crankshaft keyway.
2. Install the crankshaft sprocket (2).
3. Apply engine oil to the idler sprocket bushing.
4. Install the timing chain to the idler sprocket by aligning the dark blue link (1) of the timing chain with the mark on the sprocket (2).
5. Install the timing chain to the crankshaft sprocket by aligning the yellow link (4) of the chain with the mark on the crankshaft sprocket (3).
6. Install the idler sprocket.
