chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Fuel Filler Hose|Service and Repair|Page 4533 > < Fuel Supply Line|Locations|Page 4528
Page 1
background image

Fuel Filler Hose: Service and Repair

Filler Tube Replacement

REMOVAL PROCEDURE

CAUTION:
^

Gasoline or gasoline vapors are highly flammable. A fire could occur if an Ignition source is present. Never drain or store gasoline or
diesel fuel in an open container due to the possibility of fire or explosion. Have a dry chemical (Class B) fire extinguisher nearby.

^

Always wear safety goggles when working with fuel in order to protect the eyes from fuel splash.

1. Remove the fuel filler cap.
2. Remove the three fuel filler pipe bolts (2) located behind the fuel filler door.

CAUTION:  Refer to Vehicle Lifting Caution in Cautions and Notices.

3. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

4. Disconnect the fuel tank filler hose (2) from the fuel filler pipe (1).
5. Disconnect the fuel tank breather hose (3) from the fuel filler pipe (1).
6. Remove the fuel filler pipe and gasket from the vehicle.

INSTALLATION PROCEDURE

Fuel Filler Hose|Service and Repair|Page 4533 > < Fuel Supply Line|Locations|Page 4528